Wish to improve the performance of your outboard? Looking for the best hydrofoil money can buy? Find out everything you need to know about choosing the best hydrofoil for outboard motor.
If you have an outboard motor you think could do better in terms of performance, then it’s probably time you installed a hydrofoil.
Installing a hydrofoil is one of the easiest ways to make your outboard more efficient.
From better control to less planning time to increased fuel economy, there’s so much to gain from a hydrofoil.
But much of your success is dependent on the model you have installed.
This is why we’ve compiled a list of the hydrofoil for outboard motors in the market.
We based our decision on certain factors like material, boat size, mounting option, and motor compatibility.
In the end, we selected the models with the best performance and ratings.
Mind you, these models are attached to the motor cavitation plate instead of the hull bottom like you would see with most traditional hydrofoils.
So, if you’re excited like we are, let’s get started.
|Picture||Hydrofoil For Outboard||Editor Rating||Details|
| ||SE Sport 400 No-Drill Hydrofoil (Black)||5 Star||Check Price|
| ||New Se Sport 300 Hydro Black Hydrofoil||5 Star||Check Price|
| ||Davis Instruments Whale Tail XL Hydrofoil Stabilizer||5 Star||Check Price|
| ||SE Sport 400 No-Drill Hydrofoil (Grey)||5 Star||Check Price|
| ||Davis Doel-Fin Outboard/Outdrive Stabilizer||5 Star||Check Price|
- Best Hydrofoil for Outboard Motor Reviews
- What Is Hydrofoil?
- Does a Hydrofoil Really Work?
- Features to Consider Before Buying
- Final Words
Best Hydrofoil for Outboard Motor Reviews
The purpose of this article is to help you overcome the hurdle of choosing from so many hydrofoils in the market.
We’ve researched the top-performing models and narrowed it down to a list of the five best products.
If you don’t mind paying extra for a hydrofoil that promises improved fuel economy and higher speed limit, then the SE400 by Sports Marine will make a great choice.
Designed for engines over 40HP, the SE400 is one of the most efficient hydrofoils in the market at the moment. It doesn’t only promise to improve speed and fuel economy but also handling and control.
You will also enjoy better control when moving at high speeds while planing time is significantly reduced.
While many units may boast of doing some of the things above, they may not do it as efficiently.
Even more, another area the SE400 stands out is its ability to influence cavitation and chine walking. By using this hydrofoil, you will notice a significant reduction in both processes. This is something you will not find in many units.
The major drawback with this unit is that it costs a little extra than most hydrofoils in the same category. However, considering what it brings to the table, we think it’s a fair bargain.
Installation is pretty easy, and no drilling is required as it comes with a no-drill mount. As earlier indicated, make sure you use the hydrofoil for 40HP motor or higher. It won’t work for a motor with a smaller HP.
- Lowers cavitation
- Quickens planing
- Easy installation
- Improved control
- No-drill mount can easily get loose
Another powerful hydrofoil that works incredibly well with 40-300 HP motors is the SE Sport 300.
Made from high-quality plastic, this hydrofoil is designed to significantly reduce planing time and provide excellent control.
The sound of a plastic body may not go down well with many people. However, you shouldn’t worry as the plastic is a high-grade polypropylene polymer material, which is well known for its high strength. You will find it being used in many boats.
This unit has a narrow streamline shape, which is largely responsible for its ability to significantly reduce planing and eliminate drag.
You will also enjoy better control and improved thrust when moving at lower speeds (this allows for quick planing). The hydrofoil is great for shallow water as well as larger areas such as lakes and rivers.
Mounting hardware is provided to make installation fast and effortless.
Overall, the SE300 is a top contender for the best hydrofoil for the outboard motor. For its price, you may not find a better alternative.
- Works with most motors
- Lowers plane time
- Greater control
- Comes with mounting hardware
- We couldn’t identify any
Another incredible unit that is a top contender when it comes to the best hydrofoil for outboard motors is the White Tail XL by Davis Instruments.
One of the first things you will notice about this hydrofoil is its durable construction, which consists of marine-grade aluminum with anodized finish. This ensures it doesn’t get damaged after a short while due to impacts.
It reduces plane time by almost 40 percent, which is way more than what you get with most units in the same category. You will notice a significant improvement in your motor performance.
Like most premium models, the unit also helps to reduce fuel consumption significantly. The use of aluminum for its construction instead of plastic makes it highly durable. This device is also known for improving stability.
Like most premium models, it helps you save on fuel and increases top speed, especially when used for smaller boats.
- Lowers cavitation and proposing
- Improves fuel economy
- Smoother ride
- Doesn’t take much time to mount
- Requires drilling
If you’re looking for a hydrofoil that can resolve planing once and for all, then you cannot go wrong with the SE Sport 400. This model is almost identical to the first hydrofoil we reviewed (SE400 Black). The major difference is the grey color design.
This unit offers everything you would need from a hydrofoil and even more. It doesn’t only help you save fuel but also increases top speed.
Finding a hydrofoil that really performs these two basic functions can be a daunting task. Luckily, it’s right in front of you.
As the name suggests, the unit is quite easy to set-up and doesn’t require drilling. It fits securely just like a drill mount. Provided you tighten the bolts frequently, it shouldn’t fall off unexpectedly.
This unit also offers increased control at high speeds, which ensures you have a smooth ride every time.
Like the Black version, it does influence cavitation and chine walking positively. The unit is recommended for 40HP outboards.
- Reduces cavitation
- Increases top speed
- Improves fuel economy
- Better control
- Doesn’t work for motors below 40HP
- Requires frequent bolt tightening to avoid falling off
To end the list is the Doel-Fin Outboard Stabilizer from Davis Instruments.
Built with safety and performance in mind, this hydrofoil is an excellent upgrade or replacement for your current inefficient hydrofoil.
The unit is designed to reduce bow rise while eliminating drag. It also increases fuel efficiency, which allows you to save on energy while still getting a good performance.
You will see a significant improvement in your boat speed – thanks to the streamlined shape of the hydrofoil and its improved plane time.
The unit is able to cut through the water, which leads to a significant reduction in drag.
Installation is pretty straightforward and shouldn’t take more than 15 minutes if you follow the instructions properly. The hardware you need for this is included in the package.
That said, drilling will be required to position the bolts and nuts correctly.
Doel-Fin works with most engines over 5HP. It will perform well, even when used for outboards on boats with fine hulls.
Overall, this is the hydrofoil you should get if you want to see a significant improvement in the overall performance of your small boats.
- Great quality
- Saves fuel
- Increases stability
- Requires drilling
What Is Hydrofoil?
A hydrofoil is basically a wing-like structure consisting of a flat or curved piece usually a metal plate that is equipped with an outboard motor of a boat or ship or attached to the hull.
While moving forward, the surface of the device reacts to the water it is passing through by causing it to flow downward. The downward flow of water is what produces an upward force, which raises the vehicle’s hull.
By raising the boat’s hull from water, the hydrofoil is able to reduce drag, which results in greater speed and efficiency.
The inventor of the hydrofoil is Alexander Graham Bell, who happens to be the person behind the invention of the telephone.
Does a Hydrofoil Really Work?
As earlier indicated, what a hydrofoil basically does is to enhance speed while reducing drag.
While a hydrofoil is a great addition to a vehicle’s outboard, it doesn’t always work in every situation.
What really determines whether a hydrofoil will work or not is your boat design.
Hydrofoils generally provide a performance boost for outboards. However, the impact may not always be felt.
Usually, the smaller the boat, the more likely the impact would be felt.
Thus, a small boat using a hydrofoil can increase its speed by 2-3 mph and significantly reduce its side to side rocking motion by 10 -15 percent.
If you don’t want to alter or scuff your cavitation plate, then opting for a hydrofoil with a no-drill mount is your best bet.
Unfortunately, no-drill mounts are notorious for falling off when traveling at high speeds or during moments of impact. And most times, this is connected to the type of mounting hardware used to secure the hydrofoil.
Thus, in order to get a secure installation, you need to use the right mounting hardware. For SE Sport hydrofoils (specifically SE 200 and SE 300), using any other clip besides the SE Sport Hydrofoil Clip will lead to an insecure mount.
The clip is made of high-quality material that is break-resistant. So, no matter how many times it falls, you don’t have to worry about breakage.
To further guarantee its resilience and durability, the clip is reinforced with fiberglass. The clip is made in the US, so you can rely on its quality.
It doesn’t take much time to install, and no drilling is required.
- No drilling required
- Four-fold securing method
- Highly durable
- Takes a bit of time to install
Features to Consider Before Buying
In order to find the perfect hydrofoil for your engine, there are some key things you need to consider.
This is probably the most important thing to keep in mind when shopping for a hydrofoil. The size of your boat will determine whether a hydrofoil will be useful to you or not.
Hydrofoils are generally targeted towards small boats and are ineffective with the larger ones.
So, if you have something below 22ft, then a hydrofoil would be a good investment. However, for larger boats, it would probably not make any difference.
Compatibility with Motor
Another thing you should strictly consider is how compatible the hydrofoil is with your outboard motor.
In this case, you need to pay attention to motor HP. For optimum performance, you need to get a hydrofoil that meets the power requirement of your outboard.
There are basically two mounting options available for hydrofoils – clamp-on and drill mount.
Drill mounts are the most common and tend to “stick” better. They usually require the cavitation plate to be drilled to set them up. The major advantage drill mount offers is that it ensures the hydrofoil always remains in place.
However, if you don’t like the idea of drilling your outboard, then you can opt for a clamp-on hydrofoil.
These units usually come with mounting hardware for clamping them to your outboard. The major disadvantage of using them is that they can fall off. This mostly occurs when moving at high speeds or during impacts.
Also, you need to consider the material type before making your final decision on a hydrofoil.
There are different materials used for making hydrofoils. The most common ones are plastic, aluminum, and stainless steel.
Plastics are hard and thus last longer and handle impacts well. Aluminum and stainless steel are also great. Stainless steel is better in terms of durability and weight; however, it’s usually more expensive.
Aluminum hydrofoils may feature an anodized finishing and other special materials to improve its durability and toughness.
We have come to the end of the review. It is now up to you to choose a suitable hydrofoil for your outboard.
All the products reviewed are based on expert recommendations and customer feedback. So, you can rest assured you will get great value for your money.
Although we’ve tried to cover everything about buying the best hydrofoil for outboard motor, you can still drop any additional questions you may have regarding the topic.
Also, feel free to share your experience with us if you’ve used any one of the products above.
That said…have fun using the best hydrofoil for your boat.